YR 53IB
Induction Hardening Chromium Plated Steel Bar
Description
Material of the Europeanization carbon steel chrome plated bar: JIS S50C / DIN CF53 / AISI 1050 and JIS S55C. Through heat treatment, the hardness is greater than common harden chrome plated rod. Induction chrome shaft reaches uniform hardening thickness with no soft spots. It has high stability, low ductility, and superior wear resistance. For mechanical guide rod, tie bar, linear bearing slide rod, excavator, loading machine, construction equipment.
Product Application
Cutting machine |
Welding machine |
Plastic injection machine |
Specification
Dia
m/m |
06 |
07 |
08 |
10 |
12 |
16 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
60 |
65 |
70 |
Tolerance
μm |
-5
-14 |
-5
-14 |
-5
-14 |
-5
-14 |
-6
-17 |
-6
-17 |
-7
-20 |
-7
-20 |
-7
-20 |
-9
-25 |
-9
-25 |
-9
-25 |
-9
-25 |
-10
-29 |
-10
-29 |
-10
-29 |
Hardening Depth |
1.0mm
up |
1.5mm
up |
2.0mm
up |
2.5mm
up |
3.0mm
up |
Standard Length |
2000~3500mm |
6000mm up |
* Other specifications can be ordered, please contact with us!
Detail
- Size : Ø 5~90mm
- Length : 2000~6500mm
- Induction Hardness : HRC 60 ± 2°
- Tensile Strength : >640~880 N/mm2
- Yield Strength : >400 N/mm2
- Elongation : >12%
- Hard Chrome Thickness : 15Micron ± 5
- Surface Roughness : Ra0.2 ~ Ra0.4
- OD Accuracy : g6
Application
- Hydraulic cylinder
- Pneumatic cylinder
- Precise machine pipes
- Agriculture machine
- Boiler construction
- Machinery :
- Stamping machine
- Punching machine
- Blow molding machine
- Plastic injection machine
- Food machine
- Forklift
|
- Automobiles:
- Crane
- Truck
- Truck lifter
- Shock absorber of car, motorcycle, bicycle
- Furniture: gas spring
- Sport equipments
- Medical equipments
- Door closer
- Jack
- Linear guide rod, guide-pillar, shaft of bearing, column bar.
|
Material
Material No. |
Similar International Grade |
Suitable for |
1.1213 |
DIN CF53 / GB 50 / BS 060A52 / NF XC48TS / UNI C53 / NBN C53 / SS1674 / JIS S50C / AISI 1050 / ISO G50E4 / ΓOCT 50 |
∨Good wear-resistance and high hardness degree
∨High stability & low deformation
∨Without soft points after induction heat treatment
∨Suitable for rolling bearing |
1.1203 |
DIN CK55 / CNS S55C / GB 55 / BS 070M55 (1C45) (060M57) / UNI XC45 / NBN C50 / SS 55-2 / UNE C55K / AISI 1055 / ISO C55E4 / ΓOCT 55 |
* Above similar steel grades are only for your reference, please kindly refer to each standard for further differences.
* You may order bright rods, ground rods, induction ground rods under this material.
* Other specification and material can be ordered. |
