YTR 20B
Interior Un-honed with Exterior Hard Chromium Plate Tube (Hollow shaft)
Description
Material of seamless pipe: JIS STKM 13C/ DIN ST 52/ ASTM A106/ SAE 1020 and welded tube: DIN ST 52.3 are provided. External diameter hard chrome plating pipe, with bright appearance and good wear resistance, is anti corrosive. Suitable for telescopic cylinder tube, hydraulic cylinder tube, guide rod of printing machine, crane, office furniture and equipment, hydraulic sawing machine, tow truck, fire fighting truck, and other fluid power transmission machinery.
Product Application
|
|
|
Sole attaching machine |
Stamping machine |
Copper and aluminum extruding machine |
Specification
ID
m/m |
OD
m/m |
4 |
8 |
5 |
10 |
6 |
12 |
6 |
16 |
6.5 |
12 |
8.5 |
16 |
12 |
16 |
14 |
18 |
14 |
20 |
16 |
25 |
18 |
25 |
18 |
35 |
19 |
25 |
20 |
25 |
|
ID
m/m |
OD
m/m |
20 |
30 |
22 |
40 |
24 |
30 |
25 |
30 |
25 |
32 |
25 |
35 |
30 |
40 |
30 |
45 |
30 |
50 |
35 |
45 |
38 |
50 |
40 |
50 |
40 |
55 |
45 |
60 |
|
ID
m/m |
OD
m/m |
50 |
60 |
50 |
65 |
60 |
75 |
60 |
80 |
65 |
75 |
65 |
80 |
75 |
90 |
80 |
90 |
85 |
95 |
95 |
110 |
110 |
120 |
110 |
130 |
140 |
153 |
|
Detail
- ID : Ø 4~140mm
- OD : Ø 8~153mm
- Length : 3000~7500mm
- Hard Chrome Thickness : 20Micron ± 5
- Surface Roughness :Ra0.2-Ra0.4
- ID Accuracy : H11
Application
- Hydraulic cylinder
- Pneumatic cylinder
- Precise machine pipes
- Agriculture machine
- Boiler construction
- Machinery :
- Stamping machine
- Punching machine
- Blow molding machine
- Plastic injection machine
- Food machine
- Forklift
|
- Automobiles:
- Crane
- Truck
- Truck lifter
- Shock absorber of car, motorcycle, bicycle
- Furniture: gas spring
- Sport equipments
- Medical equipments
- Door closer
- Jack
|
Material
Our Material |
Material No. |
Similar International Grade |
Suitable for |
JIS G3445 STKM13C |
|
ASTM MT1020 / BS ERWC3 / DIN ST45 / NF TU37b / ISO TS4 |
∨Carbon steel tubes for machine structural purposer |
DIN 2391 ST52 |
1.0580 |
JIS STKM19A / ASTM 1524 / EN E355 / ISO TS18 |
∨Mechanical and automotive engineering |
ST52 BK+S |
1.0580 |
|
∨Low deformability without heat treatment after cold forming process and stress-relief annealing |
DIN 2393 ST52.3 |
1.0570 |
ISO Gr.1 |
∨Construction of chemical plant, pipe work and mechanical engineering use |
ASTM A106 |
1.0405 |
JIS STPT410 / BS HFS410 / DIN ST45.8 / NF TU42c |
∨Seamless carbon steel pipe for high temperature service
∨Suitable for bending, flanging, welding and similar forming operations |
* Above similar steel grades are only for your reference, please kindly refer to each standard for further differences.
* Other specification and material can be ordered. |
